Install DeckConnector
Flash over USB, nothing to install.
Connect the board
- 1Plug a USB-C cable into the USB-C port of the board and into your computer.
- 2The network cable and the deck can stay plugged in.
- 3Click Connect and pick the board in the list. Its name has "USB" and "Serial" in it.
Still nothing in the list? Some USB-C cables only charge. Try another cable. Other causes · USB driver
If the board does not answer
- 1Hold the BOOT button on the board.
- 2Press and release RST.
- 3Release BOOT.
- 4Click Connect again.
Log0Stays in this tab. Passwords are never shown.
Nothing yet.